Load & Save - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Configuring with Web Based Management
6.5 "System" menu
6.5.8 Load & Save
Note
The files that can be loaded from the device depends on the role of the logged-on.
Overview of the file types
Table 6- 1
File type
Config
ConfigPack
CountryList
Debug
EDS
Firmware
GSDML
HTTPS Cert
LogFile
196
on every WBM page until either the changes made have taken effect or the
SCALANCE W device has been restarted.
Note
When the changes take effect, the WLAN connections to all WLAN interfaces will be
interrupted for a short time. The WLAN driver is started with the new settings.
HTTP
Description
This file contains the start configuration.
Among other things, this file contains the definitions
of the users, roles, groups and function rights. The
passwords are stored in the "Users" file.
Detailed configuration information. for example,
start configuration, users, certificates, favorites,
firmware of the device (if saved as well).
For more detailed information on creating and us-
ing the ConfigPack incl. firmware, refer to the sec-
tion "Maintenance (Page 421)".
The zip file contains the country list as a csv and as
a pdf file.
This file contains information for Siemens Support.
It is encrypted and can be sent by e-mail to Sie-
mens Support without any security risk.
Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the
EtherNet/IP mode
The firmware is signed and encrypted. This en-
sures that only firmware created by Siemens can
be downloaded to the device.
Information on the device properties (PROFINET)
HTTPS certificate
Maximum file size: 8192 bits
File with entries from the event log table
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
Down- Save Delete
load
X X
X X
-- X
-- X
-- X
X X
-- X
X X
-- X
--
--
--
X
--
--
--
X
--