Introduction; Information On The Configuration Manual - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Introduction

1.1

Information on the Configuration Manual

Validity of the configuration manual
This Configuration Manual covers the following products:
● SCALANCE W748-1 M12
● SCALANCE W748-1 RJ-45
● SCALANCE W788-1 M12
● SCALANCE W788-2 M12
● SCALANCE W788-2 M12 EEC
● SCALANCE W788-1 RJ-45
● SCALANCE W788-2 RJ-45
● SCALANCE W786-1 RJ-45
● SCALANCE W786-2 RJ-45
● SCALANCE W786-2IA RJ-45
● SCALANCE W786-2 SFP
This Configuration Manual applies to the following software version:
● SCALANCE W700 firmware as of version V 6.3
Note
This configuration manual does not apply to the SCALANCE W7xC-2.
Purpose of the Configuration Manual
This Configuration Manual is intended to provide you with the information you require to
install, commission and operate devices correctly. It explains how to configure the devices
and how to integrate them in a WLAN network.
How you install and connect up the device correctly is described in the operating instructions
of the device.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
1
9