Versions - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Configuring with Web Based Management
6.4 "Information" menu
● Drop-down list for page change
In pages with a large number of data records, you can navigate to the desired page.
From the drop-down list, select the affected page to display it.
● "Reset Counters" button
Click "Reset Counters" to reset all counters. The counters are reset by a restart.
Messages
If you have enabled the "Automatic Save" mode and you change a parameter the following
message appears in the display area "Changes will be saved automatically in x seconds.
Press 'Write Startup Config' to save the changes immediately.
Note
Interrupting the save
Saving starts only after the timer in the message has elapsed. How long saving takes
depends on the device.
During the save, the message "Saving configuration data in progress. Please do not switch
off the device" is displayed.
• Do not switch off the device immediately after the timer has elapsed.
6.4.2

Versions

Versions of hardware and software
This page shows the versions of the hardware and software of the device. You cannot
configure anything on this page.
122
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13