Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual page 388

Configuring with Web Based Management
6.9 "Security" menu
● Source MAC address
Shows the MAC address of the source.
● Dest. MAC Address
Shows the MAC address of the destination.
● Action
Shows the action.
– Forward
– Discard
Configuration procedure
Follow the steps below to assign an ACL rule to an interface:
1. Select the interface from the "Interface" drop-down list.
2. Select the ACL rule in the "Add Rule" drop-down list.
3. Click the "Add" button. A new entry is generated in the table.
Follow the steps below to remove an ACL rule from an interface:
Note
active rules
You cannot delete active rules.
1. Select the interface from the "Interface" drop-down list.
2. Select the ACL rule in the "Remove Rule" drop-down list.
3. Click the "Remove" button. The corresponding entry is removed in the table.
388
If the frame complies with the ACL rule, the frame is forwarded.
If the frame complies with the ACL rule, the frame is not forwarded.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13