Snmp - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Configuring with Web Based Management
6.4 "Information" menu
● Allocation Method
Shows whether the IPv4 address was assigned statically or dynamically. You configure
the static entries in "System > DHCP > Static Leases".
● Binding State
Shows the status of the assignment.
– Assigned
– Not used
– Probing
– Unknown
● Expire Time
Shows until when the assigned IPv4 address is still valid. Up to this time, the DHCP client
must either request a new IPv4 address or extend the lease time of the assigned IPv4
address.
6.4.12

SNMP

This page displays the created SNMPv3 groups. You configure the SNMPv3 groups in
"System > SNMP".
Description
The table has the following columns:
● Group Name
Shows the group name.
● User Name
Shows the user that is assigned to the group.
142
The assignment is used.
The assignment is not used.
The assignment is being checked.
The status of the assignment is unknown.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13