Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual page 174

Configuring with Web Based Management
6.4 "Information" menu
Description
The page contains the following box:
● Logged-on Clients
Shows the number of clients logged on to the access point
The table has the following columns:
● AID (Associated ID)
Shows the connection ID of the client. If the client connects to the access point via the
VAP interface, the client is assigned a connection ID. The connection ID is unique within
a VAP interface. If two clients log on at different VAP interfaces, both clients can receive
the same ID.
● Radio
Shows the available WLAN interfaces.
● Port
Shows the VAP interface.
● MAC Address
Shows the MAC address of the client.
● System Name
Shows the system name of the client if the client communicates this to the access point.
Not all clients support this parameter.
● Tx Chain
Shows the antenna connector over which the client communicates with the access point.
● Signal Strength [dBm]
Shows the signal strength of the connected client in decibel milliwatts.
● Signal strength [%]
Shows the signal strength of the connected client as a percentage.
● Age [s]
● Shows the age of the listed client.
174
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13