Ingress Rules - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Industrial wireless lan scalance w780/w740 to ieee 802.11n web based management
Hide thumbs Also See for SIMATIC NET SCALANCE W780 Series:
Table of Contents

Advertisement

Configuring with Web Based Management
6.9 "Security" menu
6.9.6.3

Ingress Rules

Introduction
On this page, you specify the ACL rules according to which incoming frames are handled by
interfaces. You specify the ACL rules in the "Rules Configuration" tab.
IP ACL ingress rules - first part of the table:
IP ACL ingress rules - second part of the table:
Description of the displayed boxes
The page contains the following boxes:
● Interface
Select the required interface from the drop-down list. The available interfaces (Page 49)
depend on your device.
To select a VLAN interface, an IP interface must be configured.
Note
If you use a VLAN interface, the ACL rule applies to all ports that belong to the VLAN.
● Add Rule
In the drop-down list select the ACL rule to be assigned to the interface.
392
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents