Description
The page contains the following boxes:
● Destination Address
Enter the IPV4, IPv6 address or the FQDN (Fully Qualified Domain Name) of the device.
● Repeat
Enter the number of ping requests.
● DNS Resolution
Select the IP address type in which an entered FQDN will be resolved.
– Auto
– IPv4
– IPv6
● Out Interface for IPv6
This selection is only required when the destination address is a multicast or a link local
address.
– "-" (factory setting)
– Select the relevant IPv6 interface.
● Ping
Click this button to start the ping function.
● Ping Output
This box shows the output of the ping function.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
In this mode, the IP address type is selected automatically.
The entered FQDN will be resolved in an IPv4 address.
The entered FQDN will be resolved in an IPv6 address.
Configuring with Web Based Management
6.5 "System" menu
265