Static Leases - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

● Use Interface IP
Specify whether or not the internal IPv4 address of the device will be used.
● Value
Enter the DHCP parameter that is transferred to the DHCP client. The content depends
on the DHCP option.
– DHCP option 67 (boot file name)
– DHCP options 3 (Router) and 6 (DNS):
– DHCP option 12 (host name):
– DHCP option 66 (TFTP Server):
– All other DHCP options
6.5.11.4

Static Leases

On this page you specify that devices with a certain MAC address are assigned to the
selected IPv4 address.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
Enter the name of the boot file in the string format.
Enter the DHCP parameter as an IPv4 address, e.g. 192.168.100.2. With DHCP
option 6, you can specify several IPv4 addresses separated by commas.
Enter the host name in the string format.
Enter the TFTP server as an IPv4 address, e.g. 192.168.100.2 or the FQDN name.
Enter the DHCP parameter in hexadecimal, e.g. the IPv4 address 192.168.100.2
corresponds to "C0A86402".
Configuring with Web Based Management
6.5 "System" menu
223