Messages In The Wlan Authentication Log - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Appendix D
D.2 Messages in the WLAN Authentication Log
D.2

Messages in the WLAN Authentication Log

Messages in access point mode
Alarm
Client <MAC address> <system name> associated suc-
cessfully.
Client <MAC address> <system name> disassociated
with reason <reason description>
VAP<Num>: Client <MAC> failed to associated; status
(<text>)
VAP<Num>: Client <MAC> disassociated with reason
(<text>)
VAP<Num>: Client <MAC>deauthenticated with reason
(<text>)
VAP<number> Client <MAC> failed to authenticate; sta-
tus (<status>)
VAP<Num>: Client <MAC> failed to disassociated; status
(<text>)
VAP<Num>: Client <MAC> associated successfully
RADIUS: Access rejected for client <MAC>
RADIUS: Access accepted for client <MAC>
WDS Connection is established to AP <MAC>
WDS disconnect from AP <MAC>
Messages in client mode
Alarm
Associated successfully to AP <MAC address> <system
name> at channel <channel number> (frequency <fre-
quency> MHz)
Disassociated from AP <MAC address> <'sys name'>
with reason (Disassociated because sending STA is leav-
ing (or has left) BSS)
Failed to authenticate to AP <MAC>; status (<Text>)
Failed to disassociate from AP <MAC>; status (<Text>)
Failed to associate to AP <MAC>; status (<Text>)
452
Description
The client has logged in successfully on the access point.
The client was logged off from the access point.
The connection of the client to the VAP has failed. The reason
is displayed as text.
The client was successfully disconnected from the VAP. The
reason is displayed as text.
The client was logged off from the AP. The reason is displayed
as text.
The authentication of the client failed. The reason is displayed
as text.
The connection of the client could not be terminated. The rea-
son is displayed as text.
The client has connected successfully to the VAP or the client
has logged on successfully to the VAP.
The RADIUS server denies the client access.
The RADIUS server allows the client access.
The WDS connection is successfully established to the access
point.
The WDS connection to the access point is terminated.
Description
The client has logged in successfully on the access point.
The client was logged off from the access point.
The authentication of the client with the access point failed.
The reason is displayed as text.
The connection of the client to the access point could not be
terminated. The reason is displayed as text.
The connection of the client to the access point has failed. The
reason is displayed as text.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13