Learning Table - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Description
The table has the following columns:
● Port
Shows the available ports.
● Error types
The other columns after the port number contain the absolute numbers of the incoming
frames according to their error type.
In the columns of the table, a distinction is made according to the following error types:
– CRC (Cyclic Redundancy Code)
– Undersize
– Oversize
– Fragments
– Jabbers
– Collisions
6.4.9

Learning Table

Address filtering
This WBM page shows the current content of the learning table. This table lists the source
addresses of unicast address frames.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
The packet length is between 64 and 1518 bytes. The CRC of the packet is invalid.
The packet length is less than 64 bytes. The CRC of the packet is valid.
The packet length is more than 1518 bytes. The CRC of the packet is valid.
The packet length is less than 64 bytes. The CRC of the packet is invalid.
The frame length is more than 1518 bytes. The CRC of the packet is invalid.
Frames in which a collision event was detected.
Configuring with Web Based Management
6.4 "Information" menu
139