Figure 25 Receipt With Extended Graphic Characters - Ithaca 150 Programmer's Manual

Programmer's Guide
[ESC]U<1>
[ESC]:
[ESC]3<34>
<201>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205>
<187>[CR][LF]
<186> PcOS PRINTERS
<186> <186>[CR][LF]
<186> MADE TO ORDER
<186> BUILT TO LAST
<200>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205><205><205><205><205><205>
<205><205><205><205>
<188>[CR][LF]
[ESC]U<0>
[ESC]0
[SI]
[CR][LF]
ST# 2000 OP# 00067 TE# 021 0035[CR][LF]
KLEENEX FAM D04 QTY 1
RITZ D01 QTY 1
CHIPS D01 QTY 1
STORAGE BAG D04 QTY 1
SUB TOTAL 7.18[CR][LF]
SALES TAX 1 .50[CR][LF]
------[CR][LF]
TOTAL 7.68[CR][LF]
CASH TEND 20.00[CR][LF]
CHANGE DUE 12.23[CR][LF]
[CR][LF]
[ESC]a<1>
THANK YOU FOR SHOPPING WITH US[CR][LF]
[ESC]a<0>
[CR][LF]
{DATE:0} {TIME:0}[CR][LF]
12/14/99
PcOS Series 150
Select unidirectional print for better alignment.
Select 12 cpi.
Set line spacing to 0.157 inch. (This is slightly smaller than 1/6 inch.)
Send the line graphic characters to the printer.
<186>[CR][LF]
<186>[CR][LF]
<186>[CR][LF]
This finishes the line graphics.
Reenable bidirectional printing.
Set standard 1/8-inch line spacing.
Set 17 cpi.
Finish the form.
1.68 J[CR][LF]
2.50 D[CR][LF]
1.50 D[CR][LF]
1.50 J[CR][LF]
Rev G
Printing Graphics
Figure 25 Receipt with extended graphic
characters
Page 129