Ithaca 150 Programmer's Manual page 48

Control Codes
Character Attributes
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Page 38
PcOS Series 150
Select superscript
[ESC] S <0>
1BH 53H 00H
<27> <83> <0>
&%SP
none
This command selects superscript. All following characters will be printed half
size on the upper side of the print line.
Note: This feature is not available in all print modes. See page 30 for available
modes.
Select subscript
[ESC] S <1>
1BH 53H 01H
<27> <83> <1>
&%SB
none
This command selects subscript. All following characters will be printed half
size on the bottom side of the print line.
Note: This feature is not available in all print modes. See page 30 for available
modes.
End superscript or subscript
[ESC] T
1BH 54H
<27> <84>
&%SE
none
This command cancels superscript or subscript.
Begin italics
[ESC] % G
1BH 25H 47H
<27> <37> <71>
&%MI
[ESC] 4
This command begins italic print mode.
Note: Italics are not available in all print modes. See page 30 for available
modes.
Rev G
Programmer's Guide
12/14/99