Operator Panel Controls; Push Buttons - Momentary Switches; Indicators - Ithaca 150 Programmer's Manual

Programmer's Guide
Chapter 6:

Operator Panel Controls

Push Buttons - Momentary Switches

The FEED key advances the receipt and journal paper.
The RELEASE key opens and closes the validation clamp. It cycles through open and close mode.
The RESUME key restarts the printer after a failure has been cleared.

Indicators

There are three indicators. They are READY, ALARM, and POWER. The printer can be in any of
the following states.
STATE
Ready (The printer is ready to receive data and print.)
Not ready
Off-line
Ready but waiting for a form
Out of paper
Menu mode
Test mode
Printer fault
Printer failure
Watchdog fault (The printer resets.)
12/14/99
PcOS Series 150
Rev G
Operator Panel Controls
READY ALARM
(Red
(Green
Indicator) Indicator)
On Off
Off Off
Flash Off
Off On
Flash Off
Flash Off
Off Flash
Off Off
POWER
(Green
Indicator)
On
On
On
On
Flash
On
On
Off
Page 89