Graphic Objects; Line Objects - Ithaca Epic 950 Integration Manual

Programming for the Epic 950 Epic 950 OEM Integration Manual
Code 128-Auto
EAN-8
EAN-13
Interleaved 2 of 5
UPC-A
UPC-E
Code93

Graphic Objects

Graphic objects are created by the landscape printing mode graphics command (GS *).
Graphic objects may only be printed as part of a landscape page. To print a graphic
without entering landscape printing mode, you must use bitmap graphics mode.
No landscape graphic may be wider than 256 dots, though they may be as tall as the
width of the Epic 950' print head. If a graphic needs to be printed wider than 256 dots,
either subdivide it into narrower sections or print it using bitmap graphics commands.

Line Objects

Line objects are created using the draw line in landscape printing mode command (GS
l).
Line objects may only be printed as part of a landscape page. If the length of a line
object is set to exceed the printable area of a ticket, the line will be truncated at the end
of the printable area.
Page 64 95-05245
Rev G