Web Interface
Setup ► VGA
This tab allows you to configure the window VGA Settings for the three VGA input modes:
VGA, YPbPr and Composite.
Input Mode
Select the input mode to adjust: VGA, YPbPr or Composite.
Note: Auto switching will not be active for composite or component (YPbPr) video when
these modes are enabled.
Auto-Sync
Click the Initiate button to activate Auto-Sync for the selected input mode.
Phase / Clock
Click + or – to adjust values for Phase and Clock settings.
Horizontal Position
Click the Left or Right buttons to adjust the Horizontal Position.
Vertical Position
Click the Down or Up buttons to adjust the Vertical Position.
Setup ► Serial
Select the Baud Rate for the Serial connection: 4800, 9600, 19200, 38400, 57600 or
115200. The default setting is 19200.
page | 30