Gefen EXT-4K600A-MF-51-HBTLS User Manual page 63

Firmware Version
GET Firmware version.
Syntax
Gateway (#SET_ / #GET_)
SET the Gateway address.
Syntax
Parameters (param1)
Examples
GET the current Gateway address.
Syntax
Help
Lists all available TCP/UDP commands. If a command is specified then both the description and
syntax will be listed for the command.
Syntax
Parameters (param1)
Example
Image Position (#SET_ / #GET_)
SET VGA image position.
Syntax
Parameters
Examples
GET VGA image position value(s).
Syntax
Parameters
Examples
#GET_FIRMWARE_VERSION
#SET_GATEWAY PARAM1
PARAM1 = XXX.XXX.XXX.XXX
XXX - 0 ~ 255
#SET_GATEWAY 192.168.1.1
#GET_GATEWAY
#HELP (OPTIONAL PARAM1)
PARAM1 = ANY TCP/UDP COMMAND (NO '#')
#HELP GET_IPCONFIG
#SET_IMAGE_POS PARAM1 PARAM2
PARAM1 = U, D, L, R
U - SHIFT IMAGE UP
D - SHIFT IMAGE DOWN
L - SHIFT IMAGE LEFT
R - SHIFT IMAGE RIGHT
PARAM2 = 0 ~ 100
0 ~ 100 - ADJUSTMENT VALUE IN PIXELS
#SET_IMAGE_POS U 10; #SET_IMAGE_POS D 10
#SET_IMAGE_POS L 10; #SET_IMAGE_POS R 10
#GET_IMAGE_POS PARAM1
PARAM1 = 0, U, D, L, R
0 - ALL (FEEDBACK ORDER IS VERTICAL, HORIZONTAL)
U - UP
D - DOWN
L - LEFT
R - RIGHT
#GET_IMAGE_POS 0; #GET_IMAGE_POS U
page | 53
Commands