Table of Contents
Advertisement
Web Interface
Setup ► Video
This tab is the main configuration page for the input and outputs. The Output Resolution
modes include 12 presets and Native.
Native
The Native mode will attempt to set the output of the unit based on the native resolution
detected in the EDID of the connected display.
Picture Settings
If desired, select an Input, then use the option sliders to set the Brightness, Contrast,
Color, Sharpness and Tint. You can also set them manually by typing in numeric values
(0 – 100)
.
Aspect Ratio
Choose an Aspect Ratio for the selected Input: 16:9, 4:3 or Auto.
Horizontal / Vertical Overscan
Use the sliders to adjust the Horizontal or Vertical overscan for the selected Input.
page | 29
Advertisement
Table of Contents
