Network Configuration Using Syner-G - Gefen EXT-4K600A-MF-51-HBTLS User Manual

Installation and Basic Operation

Network Configuration using Syner-G

1. Download the application here:
Launch the Gefen Syner-G application.
2. Select the EXT-4K600A-MF-51-HBTLS from the list of products.
3. Under the Device Settings section, select either Static or DHCP from the IP Mode
drop-down list.
● Select Static to manually enter the IP address, subnet mask, and gateway IP. Consult with your
network administrator, if necessary.
● Select DHCP to let the DHCP server automatically assign the IP address,
subnet mask, and gateway IP.
● Telnet Port is fixed at 80.
i i
NOTE: The default IP address is 192.168.1.72
http://www.gefen.com/synerg/
page | 6