Connecting And Operating The Vga To Dvi Scaler - Gefen EXT-VGA-2-DVISP User Manual

CONNECTING AND OPERATING THE VGA TO DVI SCALER PLUS
Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler Plus
will not work without a source plugged in)
Connect the DVI (M-M) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler Plus.
Connect the power supply.
*Note: The default resolution of the VGA to DVI Scaler Plus is NATIVE mode,
meaning that the Scaler's DVI output matches the default native resolution of your
display.
Hold MENU and unplug and re-plug the
power source. Afterwards, you can
release the MENU button.
Auto Adjust
Press the
Output resolutions that are supported:
VGA
SGA
XGA
SXGA
UXGA
How to Connect the VGA to DVI Scaler Plus
Operating the VGA to DVI Scaler Plus
Button
MENU
+
-
-
button
480I
480P
720P/60
1080I/60
1080P/60
Shows and Hides the On Screen
Display (Menu) and Item Selection
Moves menu cursor DOWN the menu /
Increases adjustment values
Moves menu cursor UP the menu /
Decreases adjustment values
Resets the Scaler back to the
NATIVE resolution of the display
Tunes the picture to display
optimum settings
576I
576P
720P/50
1080I/50
1080P/50
4
Function
WXGA
WSXGA
WUXGA
2K/60
NATIVE