Table of Contents
Advertisement
Web Interface
Main ► I/O Status
This tab indicates the status of the inputs and outputs. The unit's power status is displayed
at the top right of the status window, as well as the Help button.
The Input table displays the Feature and Input status for:
Color Depth : The color depth of the input signal (8-bit, 10-bit, etc).
Color Space : The color space (RGB or YCbCr) of the input signal.
HDCP : Displays whether or not HDCP is detected on the input.
Active Signal : Detects whether an input signal is present or not.
Horizontal Resolution : The horizontal resolution (in pixels) of the input signal.
Vertical Resolution : The vertical resolution (in pixels) of the input signal.
Progressive / Interlaced : Detects whether the input signal is progressive or interlaced.
Refresh Rate : The refresh rate (frequency) of the input signal.
Video Mode : The video mode (HDMI or DVI) of the input signal.
Auto Input Format : The current audio input format..
The Output table displays the Feature and Output status for:
RSENSE : Displays the current Rsense state (On/Off).
HPD : Displays the current HPD state.
HDCP : Displays the current HDCP state. The HDCP state can be set using the
#set_output_HDCP
Web interface or OSD menu.
Video Mode : Displays the current output video mode.
Input
Output
command or through the Setup ► HDCP section of the
page | 28
Advertisement
Table of Contents
