Gefen EXT-4K600A-MF-51-HBTLS User Manual page 67

Operator Password
SET the operator password (this can only be set when telnet login is enabled and the user is
administrator. This password will affect other interface logins).
Syntax
Parameters
Examples
OSD Timeout (#SET_ / #GET_)
SET the OSD Timeout.
Syntax
Parameters
Examples
GET the OSD Timeout.
Syntax
Output HDCP (#SET_ / #GET_)
SET output HDCP encoding mode.
Syntax
Parameters
Examples
GET output HDCP encoding mode.
Syntax
#SET_OPER_PASS PARAM1
PARAM1 = 1-12 ALPHANUMERIC CHARACTERS
ALLOWED CHARACTERS: A-Z, a-z, 0-9 (CASE SENSITIVE, NO SPECIAL
CHARACTERS)
#SET_OPER_PASS OPERATOR
#SET_OSD_TIMEOUT PARAM1
PARAM1 = 0 ~ 4
0 - OFF
1 - 5 SECONDS
2 - 10 SECONDS
3 - 30 SECONDS
4 - 60 SECONDS
#SET_OSD_TIMEOUT 3
#GET_OSD_TIMEOUT
#SET_OUTPUT_HDCP PARAM1
PARAM1 = 1 ~ 2
1 - ACTIVE (HDCP PASS-THROUGH)
2 - ON (ALWAYS ENCRYPT WITH HDCP 1.4)
#SET_OUTPUT_HDCP 2; #SET_OUTPUT_HDCP 1
#GET_OUTPUT_HDCP
page | 57
Commands