Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Gefen DVI to RGBS with Scaler EXT-DVI-2-RGBSS
Summary of Contents for Gefen DVI to RGBS with Scaler EXT-DVI-2-RGBSS
- Page 1 ® DVI to RGBS with Scaler EXT-DVI-2-RGBSS User Manual www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen, LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. DVI to RGBS with Scaler is a trademark of Gefen, LLC ©...
-
Page 3: Table Of Contents
Introduction Operation Notes Features Panel Layout Panel Descriptions Connecting And Operating The DVI To RGBS With Scaler Operating The DVI To RGBS With Scaler 10 Output Signal Confi guration 11 Specifi cations 12 Warranty CONTENTS... -
Page 4: Introduction
Congratulations on your purchase of the DVI to RGBS with Scaler. Your complete satisfaction is very important to us. The Gefen DVI to RGBS with Scaler The DVI to RGBS with Scaler takes your DVI-I computer video card/HDTV video signal and converts it to analog RGBS formats. Now you can display desktop or laptop computer and/or HDTV content on your analog RGBS display or projector. -
Page 5: Operation Notes
READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI TO RGBS WITH SCALER • Output signal types are not confi gured through the on-screen GUI. To confi gure the output signal type of the DVI to RGBS with Scaler use the DIP switches located on the underside of the unit. -
Page 6: Features
Features • Connects computers with DVI-D/DVI-I connectors to analog RGBS monitors or projectors • The output is either in the form of RGB, RGBS at sync 0.3V, RGBS at sync 5V, or YPbPr Component Video • Operates by infrared remote control and friendly On-Screen Display (OSD) menu •... -
Page 7: Panel Layout
PANEL LAYOUT Front Panel Back Panel... -
Page 8: Panel Descriptions
IR Receiver This receiver will receive commands from an optional RMT-SR-IR remote control. This receiver requires line-of-sight to the IR remote control for successful operation. DVI-I Input This receptacle will accept digital and analog signals. When using a analog VGA source use a VGA to DVI-A type cable. -
Page 9: Connecting And Operating The Dvi To Rgbs With Scaler
CONNECTING AND OPERATING THE DVI TO RGBS WITH SCALER How to Connect the DVI to RGBS with Scaler Connect the DVI source to the DVI to RGBS with Scaler using the supplied DVI cable. NOTE: A VGA source may also be connected using a VGA to DVI-A cable. Connect either a RGBS or component video device to the BNC output connectors using user supplied cables. -
Page 10: Operating The Dvi To Rgbs With Scaler
OPERATING THE DVI TO RGBS WITH SCALER This portion of the manual will be described using the front panel operation buttons. The following are the main menu options. Use the - and + buttons to choose your desired subcategory and press Menu to enter it. CONTRAST BRIGHTNESS FINE TUNE... - Page 11 OPERATING THE DVI TO RGBS WITH SCALER Press the MENU button to select the COLOR option. There are several sub-options that are available for adjustment. Select the desired option using the - and + buttons and press the MENU button to begin adjustment. Use the - and + buttons to adjust the selected option and press the MENU button when you are fi...
- Page 12 OPERATING THE DVI TO RGBS WITH SCALER Press the MENU button to select the OSD option. There are several sub-categories that are available for adjustment. Select the desired option using the - and + buttons and press the MENU button to begin adjustment. Use the - and + buttons to adjust the selected option and press the MENU button when you are fi...
-
Page 13: Output Signal Confi Guration
OUTPUT SIGNAL CONFIGURATION HOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNAL There is a bank of 2 dip switches on the underside of the DVI to RGBS with Scaler unit that controls which type of signal is output. Please remove the metallic tape on the underside of the unit to reveal this bank of switches. -
Page 14: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ...165 MHz Input Video Signal ...1.2 Volts p-p Input DDC Signal ...5 Volts p-p (TTL) Single Link Range ...1920x1200 DVI Connector ... DVI-I 29 pin Female (digital or analog) BNC Connector ... 4 x BNC Female (S/Y, R/Pr, B/Pb, G/Y) Power Supply ...5V DC Power Consumption ... -
Page 15: Warranty
Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notifi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi... - Page 16 Rev A5 6.01 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com...