Advertisement
CONNECTING AND OPERATING THE VGA TO DVI SCALER PLUS
Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler Plus
will not work without a source plugged in)
Connect the DVI (M-M) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler Plus.
Connect the power supply.
*Note: The default resolution is set to NATIVE mode.
Hold MENU and unplug and re-plug the
power source. After you have done that,
you can release the MENU button
Auto Adjust
Press the
Output resolutions that are supported:
VGA
SGA
XGA
SXGA
UXGA
How to Connect the VGA to DVI Scaler Plus
Operating the VGA to DVI Scaler Plus
Button
MENU
+
-
-
button
480I
480P
720P/60
1080I/60
1080P/60
Shows and Hides the On Screen Menu /
Menu and Item Selection
Moves menu cursor DOWN the menu /
Increases adjustment values
Moves menu cursor UP the menu /
Decreases adjustment values
Resets scaler back to NATIVE resolution
Tunes picture to displays optimum
576I
576P
720P/50
1080I/50
1080P/50
4
Function
of the display
settings
WXGA
WSXGA
WUXGA
2K/60
NATIVE
Advertisement
