Table of Contents
Advertisement
Web Interface
Network ► Settings (continued)
TCP/Telnet Settings
Enable TCP Access
Click Enable to make TCP available, or click Disable to disable TCP access.
TCP Port
Type in the a TCP port number. Default is set to 23.
Login Message on Connect
Click Show to display the Telnet Welcome Message. Click Hide to disable the Telnet
Welcome Message.
Require Password on Connect
Click Enable to force the password prompt at the beginning of a Telnet session. Click to
Disable to disable the password prompt. See
page 26
for the default password.
Web Login Settings
Username
Select Operator or Administrator.
Old Password
Enter the current (old) password in this field. See
page 26
for default passwords.
New Password
Enter the new password in this field.
Confirm New Password
Enter the new password in this field.
Discover Protocol Settings
Enable Discovery
Select Enable to find and perform simple IP configuration over a network using Syner-G.
Find Your Device
Click Show Me to have the front panel blink all LEDs to help find this device in an
equipment rack.
Discover Read Only
The Read Only and Read/Write option dictates whether or not changes can be made to
the switcher's IP settings remotely via Syner-G.
Product Description
By default, the part number is used as the description. If desired, type a new description.
page | 36
Advertisement
Table of Contents
