Connecting and Operating the DVI to VGA Conversion Box
How to Connect the DVI to VGA Conversion Box
1- Connect your analog monitor to the HD-15 female connector at the
output side of the DVI to VGA Conversion Box.
2- Connect the DVI (m-m) cable between the DVI connector on the graphic
card and the DVI input of the DVI to VGA Conversion Box.
3- Connect the power supply.
Notes: If you are connecting the DVI to VGA Conversion Box to a source that reads
EDID (most computers) the Box will report 1600x1200@60Hz. Gefen support can re-
program the EDID to another resolution at request.
4