Gefen EXT-4K600A-MF-51-HBTLS User Manual page 72

Commands
Telnet Port (#SET_ / #GET_)
SET the Telnet communication port.
Syntax
Parameters
Examples
GET the current Telnet communication port.
Syntax
Telnet Welcome (#SET_ / #GET_ / #VIEW)
SET (Enable/Disable) the Telnet welcome message.
Syntax
Parameters
Examples
GET the status of the Telnet welcome message.
Syntax
VIEW the Telnet welcome message.
Syntax
Test Pattern (#SET_ / #GET_)
SET the Test pattern.
Syntax
Parameters
Examples
GET the Test pattern.
Syntax
#SET_TELNET_PORT PARAM1
PARAM1 = 1 ~ 65535
1 ~ 65535 – USABLE PORT RANGE (CANNOT CONFLICT WITH OTHER
SERVICE PORTS)
#SET_TELNET_PORT 23
#GET_TELNET_PORT
#SET_TELNET_WELCOME PARAM1
PARAM1 = 0 ~ 1
0 - DISABLED
1 - ENABLED
#SET_TELNET_WELCOME 1
#GET_TELNET_WELCOME
#VIEW_TELNET_WELCOME
#SET_TEST_PAT PARAM1
PARAM1 = 0 ~ 5
0 - OFF
1 - WHITE
2 - RED
3 - GREEN
4 - BLUE
5 - BLACK
#SET_TEST_PAT 0
#GET_TEST_PAT
page | 62