Connecting And Operating The Vga To Dvi Scaler - Gefen VGA-2-DVISN User Manual

CONNECTING AND OPERATING THE VGA TO DVI SCALER

1- Connect your analog video card to the HD-15 female connector at the input side of
the VGA to DVI Scaler Plus. (Note: The Menu button of the VGA to DVI Scaler will not
work without a source plugged in)
2- Connect the DVI (m-m) cable between the DVI connector on the digital display and
the DVI output of the VGA to DVI Scaler.
3- Connect the power supply.
*Note: The default resolution is set to NATIVE mode.
Button
MENU
Hold MENU and unplug and replug the
power source. After you have done that,
you can release the MENU
Auto Adjust
Press the
Output resolutions that are supported:
VGA
SGA
XGA
SXGA
UXGA
How to Connect the VGA to DVI Scaler
Operating the VGA to DVI Scaler
+
-
-
button
480I
480P
720P/60
1080I/60
1080P/60
Function
Shows and Hides the On Screen Menu /
Menu and Item Selection
Moves menu cursor DOWN the menu /
Increases adjustment values
Moves menu cursor UP the menu /
Decreases adjustment values
Resets scaler back to NATIVE resolution
of the display
Tunes picture to displays optimum
settings
576I
576P
720P/50
1080I/50
1080P/50
4
WXGA
WSXGA
WVXGA
NATIVE