Table of Contents
Advertisement
Web Interface
Illuminated orange are the current Video and Audio Inputs in use. Click on desired Video
or Audio input to make changes.
With Auto Switch enabled, the scaler will automatically switch the input when it detects a
new input source. The Auto Switch function uses an Auto Switch Fallback feature to scan
for the active input source starting from HDMI 1.
For example: All 3 HDMI ports are connected and the input is set to HDMI 2. If you unplug
or turn off HDMI 2, it will first switch to HDMI 1 since an HDMI 1 signal is present. If not, it
will switch to HDMI 3 if a signal is present.
This occurs only if the current source is turned off.
The No Audio button is a pseudo audio input that offers no audio, but it's separate from
mute.
The current Input Resolution and Output Resolution are displayed below the input
options.
Main ► Volume
Adjust the Main volume and Microphone volume.
Click Mute, On or Off for Main and Microphone volume.
To adjust the volume level, use the sliders to adjust the setting up or down.
page | 27
Advertisement
Table of Contents
