Table of Contents
Advertisement
IR Remote Control Unit
1
3
4
7
ID Name
1
Power
2
Mute
3
Inputs
4
ADJ
5
RES
6
Menu buttons
7
Main Volume
8
Mic Volume
Input
HD 1
HD 2
Auto
VGA
Adj
OK
Menu
Main
Volume
Switcher Remote
RMT-MF-51A
Description
Press this button to toggle between On and Off power modes.
Powering on the unit via IR from the HDBaseT™ receiver is not
possible as the link is not active when the unit is in standby mode.
This button is fully functional when communicating directly with the
main unit.
It is possible to power off the 5x1 switcher/scaler from the
remote location via the IR remote. The scaler, however, cannot
be turned back on from the remote location.
Toggles mute/un-mute of both analog and HDMI outputs.
Press these buttons for discrete source selection. The ◄ and ►
buttons can be used to cycle between inputs in numerical order.
Performs an auto-sync action for the VGA input.
Resolution will cycle on each press of this button based on
available output resolutions. Long pressing this button will reset the
resolution to 720p 60Hz.
MENU: Activates/Deactivates OSD menu.
EXIT: Exit OSD menu or cancel current operation.
OK: Option confirmation
UP/DOWN/LEFT/RIGHT: OSD menu navigation
Decrease () or increase () audio output volume (HDMI,
HDBaseT™, and Audio out ports).
Decrease () or increase () MIC input audio volume.
page | 8
Mute
DP
HD 3
Res
Exit
E
Mic
2
5
6
8
Advertisement
Table of Contents
