Table of Contents
Advertisement
Web Interface
System ► Settings
This tab is used to configure settings that relate to operational functions or factory default
and rebooting operations.
Unsolicited feedback
This option controls feedback information on both the Serial and TCP/IP interfaces and is
used to relay the status of any changes made to options through any of the interfaces. This
includes front panel, web server, Telnet, Serial and IR remote control. It informs any serial
or TCP connected control device of changes that have NOT been made through those
interfaces. It allows any external control interface to remain in sync with the unit.
OSD Timeout
Timeout is the duration, in seconds, when the OSD menu will be automatically dismissed.
Select the amount of seconds (5 – 60 seconds). If set to Off, the OSD must be hidden
manually by pressing the Exit button on the IR remote control.
Sleep Timer
Set an amount of time for the system to go to sleep after no user interaction has been
detected.
Test Pattern
Select a Test Pattern color.
Download Current Configuration to PC
Click the Download button to download the current settings and configuration to a file.
Restore/Upload Configuration File
Click the Browse button to select the desired configuration file to upload to the switcher.
Any current settings will be overwritten when uploading a configuration file.
Firmware Update
Click Update to access the firmware update file from the drive that contains the update file.
Factory Reset
Click the Reset button to set the switcher to factory-default settings. The IP settings are
preserved to allow this to be executed remotely through TCP/IP or web interface without
losing the connection. To reset IP settings, use the Set Network Defaults button in the
Network tab.
Reboot
Click the Reboot button to reboot the switcher.
page | 37
Advertisement
Table of Contents
