Table of Contents
Advertisement
Web Interface
Setup ► HPD Pulse
This tab is used to perform HPD (Hot Plug Detect) pulse events.
HPD is a low voltage pin in the HDMI cable that is set either HIGH or LOW that indicated
the presence of a cable connection.
Momentarily changing this voltage from HIGH to LOW and then back to HIGH creates a
Pulse that disconnects and reconnects, triggering a connection reset between the unit and
the input source(s) without unplugging and plugging in the HDMI cable(s).
Setup ► HDCP Mode
This tab will configure the HDCP (High-bandwidth Digital Content Protection) options
available.
Always On / Active
Click the Always On button to encrypt all output content with HDCP. Active will set the
output HDCP encryption based on the selected source's current HDCP status.
page | 32
Advertisement
Table of Contents
