Table of Contents
Advertisement
Web Interface
Setup ► Audio
This tab allows you to configure an Audio Link setting for each input (HDMI 1-3,
DisplayPort and VGA) and global Audio Mixer settings.
Audio Link
For each Input, click the option that represents the audio source you'd like to use when that
input is selected. Select No Audio to have no audio, or select No Change keep the current
audio source that is being used active when that input is selected.
Audio Mixer
Mixer Mode: Enable or disable the microphone input. The On setting will enable
microphone mixing, and the Off setting will disable microphone mixing. The Auto setting
will enable a ducking circuit that will reduce the current audio source level to allow the
microphone audio to be heard more clearly.
Main Level Reduction: Move the slider to adjust the db setting. This is the amount of
volume that the Main level will reduce when Mic audio is detected in the Auto Mode.
Main Level Fade down: Type in the desired fade down value. This is the amount of time
that the main volume will take to reach the set reduction level value after audio is detected
in Auto Mode.
Main Level Fade up: Type in the desired fade down value. This is the amount of time that
it will take for volume to return to its precious level once Mic audio is no longer detected in
Auto Mode.
Click Save to enable the new settings.
Setup ► Names
This tab allows you to
Label/Name each of the
user Input source labels
that appear in the web
interface and on-screen.
page | 31
Advertisement
Table of Contents
