Table of Contents
Advertisement
Name
#GET_FEEDBACK
Feedback
#SET_FEEDBACK
Firmware
#GET_FIRMWARE_VERSION
version
#GET_GATEWAY
Gateway
#SET_GATEWAY
Help
#HELP
#GET_IMAGE_POS
Image Position
#SET_IMAGE_POS
#GET_INPUT_MODE
Input Mode
#SET_INPUT_MODE
Internal EDID
#GET_INTERNAL_EDID
#GET_IP_ADDRESS
IP Address
#SET_IP_ADDRESS
#GET_IP_MODE
IP Mode
#SET_IP_MODE
IP Configuration
#GET_IPCONFIG
MAC Address
#GET_MAC_ADDR
#SET_MAIN_REDUCTION
Main Reduction
#GET_MAIN_REDUCTION
#GET_MIC_VOL
Mic Volume
#SET_MIC_VOL
#GET_MIXER
Mixer
#SET_MIXER
#GET_MUTE
Mute
#SET_MUTE
Operator
#SET_OPER_PASS
Password
#GET_OSD_TIMEOUT
OSD Timeout
#SET_OSD_TIMEOUT
#GET_OUTPUT_HDCP
Output HDCP
#SET_OUTPUT_HDCP
#GET_OUTPUT_RES
Output
Resolution
#SET_OUTPUT_RES
#GET_OVERSCAN_ADJ
Overscan
Adjustment
#SET_OVERSCAN_ADJ
#GET_PHASE
Phase (VGA)
#SET_PHASE
Command(s)
page | 43
Commands List
Description(s)
GET status of unsolicited feedback
Enable/Disable unsolicited feedback
GET or SET firmware version
GET the current gateway address
SET the gateway address
Lists all available TCP/UDP commands. If a command
is specified then both the description and syntax will be
listed for the command.
GET VGA Image Position value(s)
SET VGA Image Position
GET or SET the VGA input mode
Download a preset internal EDID
GET the current IP mode
SET the IP mode to static or DHCP
GET the current IP mode
SET the IP mode to Static or DHCP
GET the current IP configuration
Print the MAC address to the screen
GET or SET Main (source) volume Reduction amount
when mic is active while using the "auto" microphone
mixer mode
GET or SET microphone volume level
GET or SET microphone mixer mode
GET output audio mute status
SET output audio mute
SET the Operator Password (this can only be set when
telnet login is enabled and the user is administrator. This
password will affect other interface logins)
GET or SET the OSD timeout
GET or SET output HDCP encoding mode
GET the output resolution status
SET output resolution
GET Overscan Adjustment value(s)
SET Overscan Adjustment
GET VGA Phase Adjustment value(s)
SET VGA Phase Adjustment
Advertisement
Table of Contents
