General; Device Concept; Operating Principle; Applications - Fronius TransTig 170 Operating Instructions Manual

General

Device Concept

The power source can also be operated via the standard TIG Multi Connector with various
remote controls or an Up/Down torch.
The TIG pulsed arc function means that the power source offers a wide frequency range.
Additionally, the power source offers "Power Factor Correction", meaning the current con-
sumption of the power source adapts to the sinusoidal grid voltage. This results in advan-
tages such as:
-
-
-
-
-
-
Operating Princi- The central control unit of the power source controls the entire welding process.
ple During the welding process, actual values are continually measured and any changes are
immediately responded to. Control algorithms ensure that the desired status is maintained.
This results in:
-
-
-

Applications

The power source can be used in repair and maintenance for production and manufactur-
ing tasks.
Remote Control The TransTig 170 and TransTig 210 power sources can be operated using the following
Operating Mode remote controls:
-
-
-
-
Low primary current
Low conductivity losses
Late tripping of the power circuit breaker
Improved stability during voltage fluctuations
Compatibility with long grid leads
Consistent input voltage range with multivoltage devices
A precise welding process,
A high degree of reproducibility on all results
Excellent weld properties.
RC Bar 1P
RC Panel MMA
RC Pedal TIG
RC Panel Basic TIG
The TransTig 170 and TransTig 210 TIG
power sources are microprocessor-control-
led inverter power sources.
A modular design and easy ability to extend
the system guarantee a high degree of fle-
xibility.
The power sources are generator-compati-
ble and are equipped with protected opera-
ting elements and a robust plastic housing.
As a result of the simple operating concept,
key functions can be quickly viewed and
adjusted.
21