Dell PowerConnect 54 Series User Manual page 248

Figure 7-21. Bind DHCP Snooping Page
3 Define the fields.
4 Click Apply Changes.
Configuring DHCP Snooping Binding Database with CLI Commands
The following table summarizes the equivalent CLI commands for configuring DHCP Snooping Binding
Database .
DHCP Snooping Binding Database
Table 7-11.
CLI Command
ip dhcp snooping binding mac-address vlan-id ip-address
{ethernet interface | port-channel port-channel-number}
expiry seconds
no ip dhcp snooping binding mac-address vlan-id
clear ip dhcp snooping database
show ip dhcp snooping binding [mac-address mac-address]
[ip-address ip-address] [vlan vlan] [ethernet interface | port-
channel port-channel-number]
248
Configuring Device Information
CLI Commands
Description
Use the ip dhcp snooping binding privileged EXEC
command to configure the DHCP snooping binding
database and to add binding entries to the database.
Use the no form of this command to delete entries
from the binding database.
Use the clear ip dhcp snooping database privileged
EXEC command to clear the DHCP binding database.
Use the show ip dhcp snooping binding user EXEC
command to display the DHCP snooping binding
database and configuration information for all
interfaces on a switch.