Dell PowerConnect 54 Series User Manual page 116

Adding Host Domain Names
1 Open the Host Name Mapping page.
2 Click Add.
The Add Host Name Mapping page opens:
Figure 6-31. Add Host Name Mapping
3 Define the relevant fields.
4 Click Apply Changes.
The IP address is mapped to the Host Name, and the switch device is updated.
Displaying the Hosts Name Mapping Table
1 Open the Host Name Mapping page.
2 Click Show All.
The Hosts Name Mapping Table opens:
Figure 6-32. Hosts Name Mapping Table
Removing Host Name from IP Address Mapping
1 Open the Host Name Mapping page.
2 Click Show All
3 The Host Mapping Table opens.
4 Select a Host Mapping Table entry.
116
Configuring System Information