Check View to create a new view, or select an existing view Name. A view defines the objects available to
the community.
•
Advanced — Selects an advanced SNMP view.
•
Group Name — Name of previously defined groups. The group defines the objects available to the
community.
•
Remove — Removes a community, when selected.
Defining a New Community
1 Open the SNMP Community page.
2 Click Add.
The Add SNMP Community page opens:
Figure 6-82. Add SNMP Community
3 Select one of the following:
•
SNMP Management Station — Defines an SNMP community for a specific management station.
(A value of 0.0.0.0 specifies all management stations.)
•
All — Defines an SNMP community for all management stations.
4 Define the remaining fields.
5 Click Apply Changes.
The new community is saved, and the device is updated.
Displaying all Communities
1 Open the SNMP Community page.
2 Click Show All.
The Community Table opens:
186
Configuring System Information