Dell PowerConnect 54 Series User Manual page 390

Displaying the Bandwidth Settings Table:
1 Open the Bandwidth Settings page.
2 Click Show All.
The Bandwidth Settings Table opens.
Figure 9-5. Bandwidth Settings Table
Assigning Bandwidth Settings Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Bandwidth
Settings page.
Table 9-5. Bandwidth Settings CLI Commands
CLI Command
traffic-shape committed-rate [committed-burst]
no traffic-shape
rate-limit rate
no rate-limit
390
Configuring Quality of Service
Description
Sets shaper on egress port. Use no form in
order to disable the shaper.
Limits the rate of incoming traffic. Use no
form in order to disable rate limit.