Adding an RMON Event
1 Open the RMON Events Control page.
2 Click Add.
The Add an Event Entry page opens.
3 Complete the information in the dialog and click Apply Changes.
The Event Table entry is added, and the device is updated.
Modifying an RMON Event
1 Open the RMON Events Control page
2 Select an entry in the Event Table.
3 Modify the fields in the dialog and click Apply Changes.
The Event Table entry is modified, and the device is updated.
Deleting RMON Event Entries
1 Open the RMON Events Control page.
2 Click Show All.
The Events Table page opens.
3 Select Remove for the event(s) that need to be deleted and then click Apply Changes.
The selected table entry is deleted, and the device is updated.
NOTE:
A single event entry can be removed from the RMON Events Control page by selecting the Remove check
box on that page.
Defining Device Events Using the CLI Commands
The following table summarizes the equivalent CLI commands for defining device events.
Table 8-8. Device Event Definition CLI Commands
CLI Command
rmon event index type
[
] [
community text
text
] [
owner name
show rmon events
368
Viewing Statistics
Description
Configures RMON events.
description
]
Displays RMON event table.