Dell PowerConnect 54 Series User Manual page 340

Table 7-42. IGMP Snooping CLI Commands
CLI Command
ip igmp snooping querier enable
no ip igmp snooping querier enable
ip igmp snooping querier address
ip-address
no ip igmp snooping querier address
show ip igmp snooping groups [vlan vlan-id]
[address ip-multicast-address
show ip igmp snooping interface vlan-id
show ip igmp snooping mrouter [interface
vlan-id]
340
Configuring Device Information
(continued)
Description
Enables Internet Group Management Protocol (IGMP) querier on
a specific VLAN. Use the no form of this command to disable.
Defines the source IP address that the IGMP Snooping querier
would use. Use the no form of this command to return to default.
Displays the Multicast groups learned by IGMP snooping.
]
Displays IGMP snooping configuration.
Displays information about dynamically learned Multicast router
interfaces.