Dell PowerConnect 54 Series User Manual page 158

3 Modify the relevant fields.
4 Click Apply Changes.
The RADIUS Server settings are modified, and the device is updated.
Deleting a RADIUS Server for the RADIUS Servers List:
1 Open the RADIUS Settings page.
2 Click Show All.
The RADIUS Servers List page opens.
3 Select a RADIUS Server in the RADIUS Servers List.
4 Select the Remove check box.
5 Click Apply Changes.
The RADIUS server is removed from the RADIUS Servers List.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the RADIUS
Settings page.
Table 6-33. RADIUS Settings CLI Commands
CLI Command
radius-server timeout timeout
radius-server retransmit retries
radius-server deadtime deadtime
radius-server key [key-string]
radius-server host {ip-address | hostname} [auth-port
auth-port-number] [timeout timeout] [retransmit retries]
[deadtime deadtime] [key key-string] [source source]
[priority priority] [usage type]
show radius-servers
158
Configuring System Information
Description
Sets the default interval for which a device waits for a
server host to reply.
Specifies the default number of times the software
searches the list of RADIUS server hosts.
Configures unavailable default servers to be skipped.
Sets the default authentication and encryption key for all
RADIUS communications between the device and the
RADIUS environment.
Specifies a RADIUS server host and any non-default
settings.
Displays the RADIUS server settings.