Dell PowerConnect 54 Series User Manual page 120

Deleting ARP Table Entry
1 Open the ARP Settings page
2 Click Show All.
The ARP Table page opens.
3 Select a table entry.
4 Select the Remove check box.
5 Click Apply Changes.
The selected ARP Table entry is deleted, and the device is updated.
Configuring ARP Using the CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the ARP
Settings page.
Table 6-22. ARP Settings CLI Commands
CLI Command
arp ip_addr hw_addr
{ethernet interface-number |
vlan vlan-id | port-channel
number}
arp timeout seconds
clear arp-cache
show arp
no arp
120
Configuring System Information
Description
Adds a permanent entry in the ARP cache.
Configures how long an entry remains in the ARP
cache.
Deletes all dynamic entries from the ARP cache
Displays entries in the ARP Table.
Removes an ARP entry from the ARP Table.