IGMP Snooping
The IGMP Snooping page contains fields for adding IGMP members. To open the IGMP Snooping page,
click Switch→ Multicast Support→ IGMP Snooping in the tree view.
Figure 7-59. IGMP Snooping
•
VLAN ID — Specifies the VLAN ID.
•
IGMP Snooping Status — Enables or disables IGMP snooping on the VLAN.
•
Auto Learn — Enables or disables Auto Learn on the device.
•
IGMP Querier Status — Enables or disables the IGMP Querier. The IGMP Querier simulates the
behavior of a multicast router, allowing snooping of the layer 2 multicast domain even though there is no
multicast router.
•
Querier IP Address — IP address of the IGMP Querier. Use either use the VLAN's IP Interface address
or define a unique IP address which will be used as a source address of Querier.
•
Host Timeout (1-2147483647) — Time before an IGMP snooping entry is aged out. The default time is
260 seconds.
•
Multicast Router Timeout (1-2147483647) — Time before aging out a Multicast router entry. The
default value is 300 seconds.
•
Leave Timeout (0-2147483647) — Time, in seconds, after a port leave message is received before the
entry is aged out. User-defined enables a user-definable timeout period, and Immediate Leave specifies
an immediate timeout period. The default timeout is 10 seconds.
338
Configuring Device Information