Table of Contents
Advertisement
Figure 7-16. Global Parameters
•
DHCP Snooping Status — Indicates if DHCP Snooping is enabled on the device. The possible field
values are:
–
Enable — Enables DHCP Snooping on the device.
–
Disable — Disables DHCP Snooping on the device. This is the default value.
•
Verify MAC Address — Indicates if MAC addresses are verified. The possible field values are:
–
Enable — Verifies that an untrusted port source MAC address matches the client's MAC address.
–
Disable — Disables verifying that an untrusted port source MAC address matches the client's MAC
address. This is the default value.
•
Save Binding Database to File — Indicates if the DHCP Snooping Database is saved to file. The possible
field values are:
–
Enable — Enables saving the database to file. This is the default value.
–
Disable — Disables saving the database to file.
–
Save Binding Database Internal — Indicates how often the DHCP Snooping Database is updated.
The possible field range is 600 – 86400 seconds. The field default is 1200 seconds.
Configuring Device Information
241
Advertisement
Table of Contents
