–
Default — Displays the default user-defined view.
–
DefaultSuper — Displays the default super user-defined view.
•
New Object ID Subtree — Indicates the device feature OID included or excluded in the selected SNMP
view.
•
Selected from List — Select the device feature OID by using the Up and Down buttons to scroll through
a list of all device OIDs.
•
Insert — Specify the device feature OID.
•
View Type — Indicates if the defined OID branch will be included or excluded in the selected SNMP
view.
Adding a View
1 Open the SNMPv3 View Settings page.
2 Click Add.
The Add a View page opens:
Figure 6-72. Add a View
3 Define the field.
4 Click Apply Changes.
The SNMP View is added, and the device is updated.
Displaying the View Table
1 Open the SNMPv3 View Settings page.
2 Click Show All.
The View Table page opens.
Configuring System Information
177