Table of Contents
Advertisement
Figure 6-50. Local User Table
Reactivating a Suspended User:
1 Open the Local User Database page.
2 Click Show All.
The Local User Table opens.
3 Select a User Name entry.
4 Select the Reactivate Suspended User check box.
5 Click Apply Changes.
The user access rights are reactivated, and the device is updated.
Deleting Users:
1 Open the Local User Database page.
2 Click Show All.
The Local User Table opens.
3 Select a User Name.
4 Select the Remove check box.
5 Click Apply Changes.
The selected user is deleted and the device is updated.
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Local User
Database page.
Table 6-29. Local User Database CLI Commands
CLI Command
username name [password
password] [level level]
[encrypted]
set username name active
146
Configuring System Information
Description
Establishes a username-based authentication system.
Reactivates a suspended user's access rights.
Advertisement
Table of Contents
