•
Operation — Defines the group access rights. The possible field values are:
–
Read — The management access is restricted to read-only, and changes cannot be made to the
assigned SNMP view.
–
Write — The management access is read-write and changes can be made to the assigned SNMP view.
–
Notify — Sends traps for the assigned SNMP view.
Defining SNMP Groups
1 Open the Access Control Group page.
2 Click Add.
The Add an Access Control Group page opens:
Figure 6-76. Add an Access Control Group
3 Define the fields in the Add an Access Control Group page.
4 Click Apply Changes.
The group is added, and the device is updated.
Displaying the Access Table
1 Open the Access Control Group page.
2 Click Show All.
180
Configuring System Information