Table of Contents
Advertisement
The Default Gateway page contains the following fields:
•
User Defined Default Gateway — Displays the default gateway IP address.
•
Active Default Gateway — Displays the currently configured Default Gateway.
•
Remove User Defined — Removes Gateway devices from the Default Gateway drop-down list, when
selected.
Selecting a Gateway Device:
1 Open the Default Gateway page.
2 Select an IP address in the Default Gateway drop-down list.
3 Select the Active check box.
4 Click Apply Changes.
The gateway device is selected and the device is updated.
Removing a Default Gateway Device:
1 Open the Default Gateway page.
2 Select the Remove check box to remove default gateways.
3 Click Apply Changes.
The default gateway entry is removed, and the device is updated.
Configuring System Information
105
Advertisement
Table of Contents
