Table of Contents
Advertisement
The MED Port Settings page contains the following fields:
•
Port — Displays the port on which LLDP-MED is enabled or disabled.
•
Enable LLDP-MED — Indicates if LLDP-MED is enabled on the selected port. The possible field values
are:
Checked — Enables LLDP-MED on the port.
Unchecked — Disables LLDP-MED on the port. This is the default value.
•
Tx Optional TLVs/Available TLVs — Contains a list of available TLVs that can be advertised by the
port. The possible field values are:
–
Network Policy — Advertises the network policy attached to the port.
–
Location — Advertises the port's location.
•
Network Policy/Available Network Policy — Contains a list of network policies that can be assigned
to a port.
•
Location Coordinate — Displays the device's location map coordinates.
•
Location Civic Address (6-160) — Displays the device's civic or street address location, for example 414
23rd Ave E. The possible field value are 6 - 160 characters.
•
Location ECS ELIN (10-25) — Displays the device's ECS ELIN location. The field range is 10-25.
Displaying the MED Port Settings Table:
1 Open the MED Port Settings page.
2 Click Show All.
The MED Port Settings Table opens:
Figure 6-66. MED Port Settings Table
Displaying advertise information details:
1 Open the MED Port Settings page.
2 Click Details.
168
Configuring System Information
Advertisement
Table of Contents
